HomeAbout UsProductsContact UsDoor Manufacturer
Non-Reflection Solvent
To make the glass non-reflection effect, just dip into the non-reflection solvent for 20 minutes and above simple application, you will see the difference.

Instructions:
1.Pour the solvent into a plastic container. Pour the solvent into a plastic container.
2.Dip the glass into the container. Dip the glass into the container.
3.Soak for 20 minutes. 
4.Lift up the glass and rinse with running water. Rinse with running water.
5.Dry the glass and you will see the difference. See the difference.
6.Filter the Dip after used and return the Dip to its original container to be reused. Return the Dip to its original container.
 

Safety Precautions

SAFETY PRECAUTIONS AND FIRST AID:

**WARNING:
  • Work with adequate ventilation.
  • Wear protective gloves, and clothing.
  • Wear protective goggles.
  • Test with a small piece of object on or into the etching chemicals before the process.
  • Repeat the etching chemicals for reused. No water or chemicals should be added to the etching chemicals. Stir or shake the chemical before used (follow the instruction).
  • The supplier is not liable for any injuries or damages occurred during the process, should the user is not followed accordingly to the precautions / first aids and instructions as provided.
  • Keep out of reach of children – Not intended for use by children.
** Skin Contact: Cause burns, wash with soap and water for 5 minutes
** Eye Contact: Cause burns, flush with water for 15 minutes
** If Swallowed: Drink large quantities of water, followed by milk. Do not induce vomiting. Get prompt Medical attention.