HomeAbout UsProductsContact UsDoor Manufacturer
Frosted Engraving Dip Print E-mail
Frosted glass.The frosted engraving dip is the combination processes of frosted dip and engraving dip .

 

 

 

 

Instructions:
1.

Dip the plain glass into frosted dip.
(Click here to see frosted dip process )

 
2.After 10-20 minutes process, the plain glass will be frosted. 
3.Rinse and clean thoroughly.

 Frosted glass.

4.Paste the desired sticker onto the frosted glass. Paste the desired sticker onto the frosted glass.
5.

Dip the frosted glass with sticker into the engraving dip.
(Click here to see engraving dip process )

After 10-20 minutes, the  frosted engraving glass  will appear as photo shown on the right.

 The frosted engraving glass.
 
Back   Next
Back

Safety Precautions

SAFETY PRECAUTIONS AND FIRST AID:

**WARNING:
  • Work with adequate ventilation.
  • Wear protective gloves, and clothing.
  • Wear protective goggles.
  • Test with a small piece of object on or into the etching chemicals before the process.
  • Repeat the etching chemicals for reused. No water or chemicals should be added to the etching chemicals. Stir or shake the chemical before used (follow the instruction).
  • The supplier is not liable for any injuries or damages occurred during the process, should the user is not followed accordingly to the precautions / first aids and instructions as provided.
  • Keep out of reach of children – Not intended for use by children.
** Skin Contact: Cause burns, wash with soap and water for 5 minutes
** Eye Contact: Cause burns, flush with water for 15 minutes
** If Swallowed: Drink large quantities of water, followed by milk. Do not induce vomiting. Get prompt Medical attention.