HomeAbout UsProductsContact UsDoor Manufacturer
Paint Pen Print E-mail
Instructions:
1.Use paint pen to write, draw or sign onto the object with the desired designs of your own. Write,draw or sign onto the glass
2.No stickers or stencils are used for the process, instead you are drawing or writing or signing onto the glass with your own freehand technique. 
3.The paint design will leave at least 2 hours to 24 hours to dry thoroughly.  
4.Then dip into frosted dip or engraving dip as your desire. Write,draw or sign onto the glass
 
Back   Next
Back

Safety Precautions

SAFETY PRECAUTIONS AND FIRST AID:

**WARNING:
  • Work with adequate ventilation.
  • Wear protective gloves, and clothing.
  • Wear protective goggles.
  • Test with a small piece of object on or into the etching chemicals before the process.
  • Repeat the etching chemicals for reused. No water or chemicals should be added to the etching chemicals. Stir or shake the chemical before used (follow the instruction).
  • The supplier is not liable for any injuries or damages occurred during the process, should the user is not followed accordingly to the precautions / first aids and instructions as provided.
  • Keep out of reach of children – Not intended for use by children.
** Skin Contact: Cause burns, wash with soap and water for 5 minutes
** Eye Contact: Cause burns, flush with water for 15 minutes
** If Swallowed: Drink large quantities of water, followed by milk. Do not induce vomiting. Get prompt Medical attention.