HomeAbout UsProductsContact UsDoor Manufacturer
Remove Rusting Solvent Print E-mail
Metals with rusting appearance can be removed by dipping into the solvent.
Only 20 minutes process, you see it, you will believe it and you will use it.

Instructions:
1.Pour the solvent into plastic container. Pour the solvent into plastic container.
2.Dip the rusting objects into the container. Dip the rusting objects into the container.
3.20 minutes process, rinse the objects with running water. Rinse the objects with running water.
4.Dry the objects, the spray a layer of lubricant oil. (Any brand -) for protection. Spray a layer of lubricant oil.
5.Return the Dip to its original container to be reused. Return the Dip to its original container to be reused.
 
Back   Next
Back

Safety Precautions

SAFETY PRECAUTIONS AND FIRST AID:

**WARNING:
  • Work with adequate ventilation.
  • Wear protective gloves, and clothing.
  • Wear protective goggles.
  • Test with a small piece of object on or into the etching chemicals before the process.
  • Repeat the etching chemicals for reused. No water or chemicals should be added to the etching chemicals. Stir or shake the chemical before used (follow the instruction).
  • The supplier is not liable for any injuries or damages occurred during the process, should the user is not followed accordingly to the precautions / first aids and instructions as provided.
  • Keep out of reach of children – Not intended for use by children.
** Skin Contact: Cause burns, wash with soap and water for 5 minutes
** Eye Contact: Cause burns, flush with water for 15 minutes
** If Swallowed: Drink large quantities of water, followed by milk. Do not induce vomiting. Get prompt Medical attention.